Cost to Build a House in Dallas County, Iowa
Building a house in Dallas County, Iowa costs about $163/sq ft in 2026 — roughly $286,880–$365,120 for a 2,000 sq ft mid-range home (construction only, land excluded). 665 single-family homes were permitted here in 2025, and the typical existing home is worth $380,240.
That is the Iowa statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.
How much building happens in Dallas County
Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.
Dallas County has recovered most of its pre-crash building volume. Builders are active here and it should be possible to get several competing bids.
U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).
Build or buy in Dallas County?
Building a median-size new home in Dallas County costs about $19,943 more than buying the typical existing one. That gap is narrower than the Iowa average of +63.4%, because existing homes here are pricier than in much of the state — which makes Dallas County one of the stronger cases for building in Iowa.
The two sides are not the same product: the build is brand new at the median new-home size for the Midwest, the existing home is typically older and smaller. Lot cost uses Iowa's average land share, and local lot prices can be well above or below it. Full Iowa build-vs-buy comparison
Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.
What builders declared on Dallas County permits (2025)
The average declared valuation was $410,268 per home, against our $326,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.
Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.
What building in Dallas County actually involves
Cost per square foot is one number. These are the conditions behind it.
How busy this market is
Dallas County ranks 2nd of 99 counties in Iowa for single-family permits issued in 2025, accounting for 9.1% of all the single-family homes permitted statewide that year.
That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.
U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).
What land adds on top
Land averages 19.8% of finished property value in Iowa, which is a markup of about 25% on construction cost. For the $326,000 build above, that implies roughly $81,500 for the lot.
This is a statewide figure. Lots inside Dallas County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.
FHFA Working Paper 19-01 land values.
Statewide factors
Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every Iowa county. See them on the Iowa page.
Cost by Home Size in Dallas County
| Home Size | Basic | Mid-Range | Premium |
|---|---|---|---|
| 500 sq ft | $60,258 | $81,500 | $110,979 |
| 1,000 sq ft | $120,516 | $163,000 | $221,957 |
| 1,500 sq ft | $180,774 | $244,500 | $332,936 |
| 2,000 sq ft | $241,032 | $326,000 | $443,915 |
| 2,500 sq ft | $301,290 | $407,500 | $554,894 |
| 3,000 sq ft | $361,548 | $489,000 | $665,872 |
| 4,000 sq ft | $482,064 | $652,000 | $887,830 |
| 5,000 sq ft | $602,580 | $815,000 | $1,109,787 |
Other Iowa counties
Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in Iowa averages 19.8% of finished property value (FHFA), which adds roughly 25% on top of these construction figures.
Priced at the Iowa state average, which is 0.87× the national average of $188/sq ft. Permit and home-value figures are specific to Dallas County.
Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.