H
HouseBuildCalc
Home / Minnesota / Washington County

Cost to Build a House in Washington County, Minnesota

Building a house in Washington County, Minnesota costs about $191/sq ft in 2026 — roughly $336,160–$427,840 for a 2,000 sq ft mid-range home (construction only, land excluded). 1,225 single-family homes were permitted here in 2025, and the typical existing home is worth $455,813.

That is the Minnesota statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.

Mid-range $/sq ft
$191
Minnesota statewide rate
Homes permitted, 2025
1,225
3rd of 87 in Minnesota
2,000 sq ft home
$336,160–$427,840
Mid-range estimate range

How much building happens in Washington County

Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.

2000: 1,7952001: 1,5142002: 1,3042003: 2,0902004: 2,4432005: 2,5322006: 1,5842007: 1,0992008: 6512009: 5482010: 5702011: 5522012: 6912013: 7592014: 6582015: 6132016: 7272017: 8112018: 9942019: 1,3942020: 1,4892021: 1,8502022: 1,3972023: 1,1932024: 1,2612025: 1,22520002025
2025
1,225
homes permitted
2000–07 peak
2,532
in 2005
Today vs. peak
48%
of pre-crash volume
vs. 2019
-12%
pre-pandemic baseline

Washington County is building 52% fewer homes than it did before the crash, up from a low of 548 in 2009. A thinner builder market can mean fewer bids and longer waits for specialist trades.

U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).

Build or buy in Washington County?

Build, land included
$529,689
1,969 sq ft mid-range + lot
Typical existing home
$455,813
Zillow, 2026-08 (+2.8% yr/yr)
Building costs
+16.2%
vs. buying existing

Building a median-size new home in Washington County costs about $73,876 more than buying the typical existing one. That gap is narrower than the Minnesota average of +45.8%, because existing homes here are pricier than in much of the state — which makes Washington County one of the stronger cases for building in Minnesota.

The two sides are not the same product: the build is brand new at the median new-home size for the Midwest, the existing home is typically older and smaller. Lot cost uses Minnesota's average land share, and local lot prices can be well above or below it. Full Minnesota build-vs-buy comparison

Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.

What builders declared on Washington County permits (2025)

Single-Family Permits Issued
1,225
1-unit structures, 2025
Avg. Declared Valuation
$386,765
Per single-family unit

The average declared valuation was $386,765 per home, against our $382,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.

Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.

What building in Washington County actually involves

Cost per square foot is one number. These are the conditions behind it.

How busy this market is

Washington County ranks 3rd of 87 counties in Minnesota for single-family permits issued in 2025, accounting for 9.5% of all the single-family homes permitted statewide that year.

That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.

U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).

What land adds on top

Land averages 29% of finished property value in Minnesota, which is a markup of about 41% on construction cost. For the $382,000 build above, that implies roughly $156,620 for the lot.

This is a statewide figure. Lots inside Washington County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.

FHFA Working Paper 19-01 land values.

Statewide factors

Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every Minnesota county. See them on the Minnesota page.

Cost by Home Size in Washington County

Home SizeBasicMid-RangePremium
500 sq ft$70,609$95,500$130,043
1,000 sq ft$141,218$191,000$260,085
1,500 sq ft$211,827$286,500$390,128
2,000 sq ft$282,436$382,000$520,170
2,500 sq ft$353,045$477,500$650,213
3,000 sq ft$423,654$573,000$780,255
4,000 sq ft$564,872$764,000$1,040,340
5,000 sq ft$706,090$955,000$1,300,426

Other Minnesota counties

Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in Minnesota averages 29% of finished property value (FHFA), which adds roughly 41% on top of these construction figures.

Priced at the Minnesota state average, which is 1.02× the national average of $188/sq ft. Permit and home-value figures are specific to Washington County.

← View all of Minnesota

Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.