Cost to Build a House in Strafford County, New Hampshire
Building a house in Strafford County, New Hampshire costs about $210/sq ft in 2026 — roughly $369,600–$470,400 for a 2,000 sq ft mid-range home (construction only, land excluded). 260 single-family homes were permitted here in 2025, and the typical existing home is worth $525,719.
That is the New Hampshire statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.
How much building happens in Strafford County
Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.
Strafford County is building 61% fewer homes than it did before the crash, up from a low of 172 in 2012. A thinner builder market can mean fewer bids and longer waits for specialist trades.
U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).
Build or buy in Strafford County?
Building a median-size new home in Strafford County costs about $349,518 more than buying the typical existing one. That gap is wider than the New Hampshire average of +61.4%, because existing homes here are cheaper than elsewhere in the state.
The two sides are not the same product: the build is brand new at the median new-home size for the Northeast, the existing home is typically older and smaller. Lot cost uses New Hampshire's average land share, and local lot prices can be well above or below it. Full New Hampshire build-vs-buy comparison
Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.
What builders declared on Strafford County permits (2025)
The average declared valuation was $416,353 per home, against our $420,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.
Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.
What building in Strafford County actually involves
Cost per square foot is one number. These are the conditions behind it.
How busy this market is
Strafford County ranks 6th of 10 counties in New Hampshire for single-family permits issued in 2025, accounting for 7.9% of all the single-family homes permitted statewide that year.
That is a quieter market. Fewer active builders can mean less competitive bidding and longer waits for specialised trades.
U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).
What land adds on top
Land averages 41% of finished property value in New Hampshire, which is a markup of about 69% on construction cost. For the $420,000 build above, that implies roughly $289,800 for the lot.
This is a statewide figure. Lots inside Strafford County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.
FHFA Working Paper 19-01 land values.
Statewide factors
Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every New Hampshire county. See them on the New Hampshire page.
Cost by Home Size in Strafford County
| Home Size | Basic | Mid-Range | Premium |
|---|---|---|---|
| 500 sq ft | $77,633 | $105,000 | $142,979 |
| 1,000 sq ft | $155,266 | $210,000 | $285,957 |
| 1,500 sq ft | $232,899 | $315,000 | $428,936 |
| 2,000 sq ft | $310,532 | $420,000 | $571,915 |
| 2,500 sq ft | $388,165 | $525,000 | $714,894 |
| 3,000 sq ft | $465,798 | $630,000 | $857,872 |
| 4,000 sq ft | $621,064 | $840,000 | $1,143,830 |
| 5,000 sq ft | $776,330 | $1,050,000 | $1,429,787 |
Other New Hampshire counties
Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in New Hampshire averages 41% of finished property value (FHFA), which adds roughly 69% on top of these construction figures.
Priced at the New Hampshire state average, which is 1.12× the national average of $188/sq ft. Permit and home-value figures are specific to Strafford County.
Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.