H
HouseBuildCalc
Home / New York / Suffolk County

Cost to Build a House in Suffolk County, New York

Building a house in Suffolk County, New York costs about $277/sq ft in 2026 — roughly $487,520–$620,480 for a 2,000 sq ft mid-range home (construction only, land excluded). 1,094 single-family homes were permitted here in 2025, and the typical existing home is worth $750,706.

That is the New York statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.

Mid-range $/sq ft
$277
New York statewide rate
Homes permitted, 2025
1,094
1st of 62 in New York
2,000 sq ft home
$487,520–$620,480
Mid-range estimate range

How much building happens in Suffolk County

Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.

2000: 3,9102001: 3,4882002: 3,4812003: 2,6362004: 2,9402005: 4,2412006: 2,4102007: 2,0302008: 9722009: 7912010: 9102011: 7592012: 8152013: 1,0292014: 1,1842015: 1,1282016: 9082017: 8422018: 7982019: 6812020: 5872021: 1,2582022: 1,3292023: 1,0072024: 1,1372025: 1,09420002025
2025
1,094
homes permitted
2000–07 peak
4,241
in 2005
Today vs. peak
26%
of pre-crash volume
vs. 2019
+61%
pre-pandemic baseline

Suffolk County is building 74% fewer homes than it did before the crash, up from a low of 587 in 2020. A thinner builder market can mean fewer bids and longer waits for specialist trades.

U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).

Build or buy in Suffolk County?

Build, land included
$1,172,363
2,459 sq ft mid-range + lot
Typical existing home
$750,706
Zillow, 2026-08 (+3.7% yr/yr)
Building costs
+56.2%
vs. buying existing

Building a median-size new home in Suffolk County costs about $421,657 more than buying the typical existing one. That gap is narrower than the New York average of +132%, because existing homes here are pricier than in much of the state — which makes Suffolk County one of the stronger cases for building in New York.

The two sides are not the same product: the build is brand new at the median new-home size for the Northeast, the existing home is typically older and smaller. Lot cost uses New York's average land share, and local lot prices can be well above or below it. Full New York build-vs-buy comparison

Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.

What builders declared on Suffolk County permits (2025)

Single-Family Permits Issued
1,094
1-unit structures, 2025
Avg. Declared Valuation
$846,782
Per single-family unit

The average declared valuation was $846,782 per home, against our $554,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.

Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.

What building in Suffolk County actually involves

Cost per square foot is one number. These are the conditions behind it.

How busy this market is

Suffolk County ranks 1st of 62 counties in New York for single-family permits issued in 2025, accounting for 9.5% of all the single-family homes permitted statewide that year.

That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.

U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).

What land adds on top

Land averages 41.9% of finished property value in New York, which is a markup of about 72% on construction cost. For the $554,000 build above, that implies roughly $398,880 for the lot.

This is a statewide figure. Lots inside Suffolk County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.

FHFA Working Paper 19-01 land values.

Statewide factors

Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every New York county. See them on the New York page.

Cost by Home Size in Suffolk County

Home SizeBasicMid-RangePremium
500 sq ft$102,402$138,500$188,596
1,000 sq ft$204,803$277,000$377,191
1,500 sq ft$307,205$415,500$565,787
2,000 sq ft$409,606$554,000$754,383
2,500 sq ft$512,008$692,500$942,979
3,000 sq ft$614,410$831,000$1,131,574
4,000 sq ft$819,213$1,108,000$1,508,766
5,000 sq ft$1,024,016$1,385,000$1,885,957

Other New York counties

Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in New York averages 41.9% of finished property value (FHFA), which adds roughly 72% on top of these construction figures.

Priced at the New York state average, which is 1.48× the national average of $188/sq ft. Permit and home-value figures are specific to Suffolk County.

← View all of New York

Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.