Cost to Build a House in Brunswick County, North Carolina
Building a house in Brunswick County, North Carolina costs about $169/sq ft in 2026 — roughly $297,440–$378,560 for a 2,000 sq ft mid-range home (construction only, land excluded). 4,454 single-family homes were permitted here in 2025, and the typical existing home is worth $412,270.
That is the North Carolina statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.
How much building happens in Brunswick County
Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.
Brunswick County is building more homes now than at any point before the 2008 crash — a genuinely expanding market, which usually means an established pool of builders and subdivision lots, but also competition for crews.
U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).
Build or buy in Brunswick County?
Building a median-size new home in Brunswick County costs about $66,600 more than buying the typical existing one. That gap is narrower than the North Carolina average of +40.6%, because existing homes here are pricier than in much of the state — which makes Brunswick County one of the stronger cases for building in North Carolina.
The two sides are not the same product: the build is brand new at the median new-home size for the South, the existing home is typically older and smaller. Lot cost uses North Carolina's average land share, and local lot prices can be well above or below it. Full North Carolina build-vs-buy comparison
Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.
What builders declared on Brunswick County permits (2025)
The average declared valuation was $282,366 per home, against our $338,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.
Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.
What building in Brunswick County actually involves
Cost per square foot is one number. These are the conditions behind it.
How busy this market is
Brunswick County ranks 2nd of 100 counties in North Carolina for single-family permits issued in 2025, accounting for 6.8% of all the single-family homes permitted statewide that year.
That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.
U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).
What land adds on top
Land averages 23.7% of finished property value in North Carolina, which is a markup of about 31% on construction cost. For the $338,000 build above, that implies roughly $104,780 for the lot.
This is a statewide figure. Lots inside Brunswick County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.
FHFA Working Paper 19-01 land values.
Statewide factors
Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every North Carolina county. See them on the North Carolina page.
Cost by Home Size in Brunswick County
| Home Size | Basic | Mid-Range | Premium |
|---|---|---|---|
| 500 sq ft | $62,476 | $84,500 | $115,064 |
| 1,000 sq ft | $124,952 | $169,000 | $230,128 |
| 1,500 sq ft | $187,428 | $253,500 | $345,191 |
| 2,000 sq ft | $249,904 | $338,000 | $460,255 |
| 2,500 sq ft | $312,380 | $422,500 | $575,319 |
| 3,000 sq ft | $374,856 | $507,000 | $690,383 |
| 4,000 sq ft | $499,809 | $676,000 | $920,511 |
| 5,000 sq ft | $624,761 | $845,000 | $1,150,638 |
Other North Carolina counties
Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in North Carolina averages 23.7% of finished property value (FHFA), which adds roughly 31% on top of these construction figures.
Priced at the North Carolina state average, which is 0.90× the national average of $188/sq ft. Permit and home-value figures are specific to Brunswick County.
Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.