H
HouseBuildCalc
Home / Texas / Montgomery County

Cost to Build a House in Montgomery County, Texas

Building a house in Montgomery County, Texas costs about $173/sq ft in 2026 — roughly $304,480–$387,520 for a 2,000 sq ft mid-range home (construction only, land excluded). 11,597 single-family homes were permitted here in 2025, and the typical existing home is worth $345,016.

That is the Texas statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.

Mid-range $/sq ft
$173
Texas statewide rate
Homes permitted, 2025
11,597
2nd of 223 in Texas
2,000 sq ft home
$304,480–$387,520
Mid-range estimate range

How much building happens in Montgomery County

Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.

2000: 4,0672001: 3,9972002: 4,4972003: 5,5812004: 6,0232005: 6,5862006: 7,4172007: 5,0742008: 3,5832009: 2,7732010: 2,7232011: 2,7952012: 3,3642013: 4,9762014: 5,5112015: 4,9702016: 4,1752017: 5,2902018: 6,6632019: 6,0822020: 8,9012021: 12,2272022: 11,8182023: 11,2592024: 11,5862025: 11,59720002025
2025
11,597
homes permitted
2000–07 peak
7,417
in 2006
Today vs. peak
156%
of pre-crash volume
vs. 2019
+91%
pre-pandemic baseline

Montgomery County is building more homes now than at any point before the 2008 crash — a genuinely expanding market, which usually means an established pool of builders and subdivision lots, but also competition for crews.

U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).

Build or buy in Montgomery County?

Build, land included
$491,493
2,162 sq ft mid-range + lot
Typical existing home
$345,016
Zillow, 2026-08 (-1.4% yr/yr)
Building costs
+42.5%
vs. buying existing

Building a median-size new home in Montgomery County costs about $146,477 more than buying the typical existing one. That gap is narrower than the Texas average of +62%, because existing homes here are pricier than in much of the state — which makes Montgomery County one of the stronger cases for building in Texas.

The two sides are not the same product: the build is brand new at the median new-home size for the South, the existing home is typically older and smaller. Lot cost uses Texas's average land share, and local lot prices can be well above or below it. Full Texas build-vs-buy comparison

Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.

What builders declared on Montgomery County permits (2025)

Single-Family Permits Issued
11,597
1-unit structures, 2025
Avg. Declared Valuation
$287,315
Per single-family unit

The average declared valuation was $287,315 per home, against our $346,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.

Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.

What building in Montgomery County actually involves

Cost per square foot is one number. These are the conditions behind it.

How busy this market is

Montgomery County ranks 2nd of 223 counties in Texas for single-family permits issued in 2025, accounting for 8.2% of all the single-family homes permitted statewide that year.

That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.

U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).

What land adds on top

Land averages 23.9% of finished property value in Texas, which is a markup of about 31% on construction cost. For the $346,000 build above, that implies roughly $107,260 for the lot.

This is a statewide figure. Lots inside Montgomery County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.

FHFA Working Paper 19-01 land values.

Statewide factors

Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every Texas county. See them on the Texas page.

Cost by Home Size in Montgomery County

Home SizeBasicMid-RangePremium
500 sq ft$63,955$86,500$117,787
1,000 sq ft$127,910$173,000$235,574
1,500 sq ft$191,864$259,500$353,362
2,000 sq ft$255,819$346,000$471,149
2,500 sq ft$319,774$432,500$588,936
3,000 sq ft$383,729$519,000$706,723
4,000 sq ft$511,638$692,000$942,298
5,000 sq ft$639,548$865,000$1,177,872

Other Texas counties

Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in Texas averages 23.9% of finished property value (FHFA), which adds roughly 31% on top of these construction figures.

Priced at the Texas state average, which is 0.92× the national average of $188/sq ft. Permit and home-value figures are specific to Montgomery County.

← View all of Texas

Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.