H
HouseBuildCalc
Home / Virginia / Page County

Cost to Build a House in Page County, Virginia

Building a house in Page County, Virginia costs about $197/sq ft in 2026 — roughly $346,720–$441,280 for a 2,000 sq ft mid-range home (construction only, land excluded). 141 single-family homes were permitted here in 2025, and the typical existing home is worth $309,892.

That is the Virginia statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.

Mid-range $/sq ft
$197
Virginia statewide rate
Homes permitted, 2025
141
43rd of 129 in Virginia
2,000 sq ft home
$346,720–$441,280
Mid-range estimate range

How much building happens in Page County

Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.

2000: 782001: 972002: 972003: 1212004: 1582005: 2202006: 1552007: 1142008: 762009: 442010: 372011: 372012: 462013: 392014: 392015: 442016: 572017: 662018: 592019: 712020: 802021: 872022: 1692023: 1922024: 1642025: 14120002025
2025
141
homes permitted
2000–07 peak
220
in 2005
Today vs. peak
64%
of pre-crash volume
vs. 2019
+99%
pre-pandemic baseline

Page County is building 36% fewer homes than it did before the crash, up from a low of 37 in 2010. A thinner builder market can mean fewer bids and longer waits for specialist trades.

U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).

Build or buy in Page County?

Build, land included
$655,252
2,162 sq ft mid-range + lot
Typical existing home
$309,892
Zillow, 2026-08 (+4.3% yr/yr)
Building costs
+111.4%
vs. buying existing

Building a median-size new home in Page County costs about $345,360 more than buying the typical existing one. That gap is wider than the Virginia average of +53.7%, because existing homes here are cheaper than elsewhere in the state.

The two sides are not the same product: the build is brand new at the median new-home size for the South, the existing home is typically older and smaller. Lot cost uses Virginia's average land share, and local lot prices can be well above or below it. Full Virginia build-vs-buy comparison

Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.

What builders declared on Page County permits (2025)

Single-Family Permits Issued
141
1-unit structures, 2025
Avg. Declared Valuation
$227,767
Per single-family unit

The average declared valuation was $227,767 per home, against our $394,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.

Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.

What building in Page County actually involves

Cost per square foot is one number. These are the conditions behind it.

How busy this market is

Page County ranks 43rd of 129 counties in Virginia for single-family permits issued in 2025, accounting for 0.7% of all the single-family homes permitted statewide that year.

That is an active market with a reasonable choice of builders.

U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).

What land adds on top

Land averages 35% of finished property value in Virginia, which is a markup of about 54% on construction cost. For the $394,000 build above, that implies roughly $212,760 for the lot.

This is a statewide figure. Lots inside Page County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.

FHFA Working Paper 19-01 land values.

Statewide factors

Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every Virginia county. See them on the Virginia page.

Cost by Home Size in Page County

Home SizeBasicMid-RangePremium
500 sq ft$72,827$98,500$134,128
1,000 sq ft$145,654$197,000$268,255
1,500 sq ft$218,481$295,500$402,383
2,000 sq ft$291,309$394,000$536,511
2,500 sq ft$364,136$492,500$670,638
3,000 sq ft$436,963$591,000$804,766
4,000 sq ft$582,617$788,000$1,073,021
5,000 sq ft$728,271$985,000$1,341,277

Other Virginia counties

Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in Virginia averages 35% of finished property value (FHFA), which adds roughly 54% on top of these construction figures.

Priced at the Virginia state average, which is 1.05× the national average of $188/sq ft. Permit and home-value figures are specific to Page County.

← View all of Virginia

Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.