Cost to Build a House in Burleigh County, North Dakota
Building a house in Burleigh County, North Dakota costs about $176/sq ft in 2026 — roughly $309,760–$394,240 for a 2,000 sq ft mid-range home (construction only, land excluded). 261 single-family homes were permitted here in 2025, and the typical existing home is worth $387,960. Population: 98,000.
That applies a local adjustment of +2% to the North Dakota average of $173/sq ft.
How much building happens in Burleigh County
Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.
Burleigh County is building 52% fewer homes than it did before the crash, up from a low of 132 in 2023. A thinner builder market can mean fewer bids and longer waits for specialist trades.
U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).
Build or buy in Burleigh County?
Building a median-size new home in Burleigh County costs about $32,173 more than buying the typical existing one. That gap is narrower than the North Dakota average of +37.8%, because existing homes here are pricier than in much of the state — which makes Burleigh County one of the stronger cases for building in North Dakota.
The two sides are not the same product: the build is brand new at the median new-home size for the Midwest, the existing home is typically older and smaller. Lot cost uses North Dakota's average land share, and local lot prices can be well above or below it. Full North Dakota build-vs-buy comparison
Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.
What builders declared on Burleigh County permits (2025)
The average declared valuation was $344,395 per home, against our $352,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.
Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.
Local Market Factors
- ›Bismarck/state capital
- ›Government employment stability
What building in Burleigh County actually involves
Cost per square foot is one number. These are the conditions behind it.
How busy this market is
Burleigh County ranks 2nd of 53 counties in North Dakota for single-family permits issued in 2025, accounting for 14.8% of all the single-family homes permitted statewide that year.
That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.
U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).
What land adds on top
Land averages 17.3% of finished property value in North Dakota, which is a markup of about 21% on construction cost. For the $352,000 build above, that implies roughly $73,920 for the lot.
This is a statewide figure. Lots inside Burleigh County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.
FHFA Working Paper 19-01 land values.
What the trades cost
Median hourly wage, North Dakota. BLS Occupational Employment and Wage Statistics, May 2025.
Climate, spec and timing
- 8,974 heating and 520 cooling degree days a year in North Dakota — heating drives the mechanical budget. (NOAA, 2016-2025 average)
- The median new home in the Midwest is 1,969 sq ft and the Census median contract price there is $194.09/sq ft, excluding land — the same basis as our estimate above. (Census Survey of Construction 2025)
- Statewide, permit filings peak in May and bottom out in December. Contractors have the most capacity in the quiet months.
- North Dakota issued 1,761 single-family permits in 2025 overall. See the 35-year state history.
Cost by Home Size in Burleigh County
| Home Size | Basic | Mid-Range | Premium |
|---|---|---|---|
| 500 sq ft | $65,064 | $88,000 | $119,830 |
| 1,000 sq ft | $130,128 | $176,000 | $239,660 |
| 1,500 sq ft | $195,191 | $264,000 | $359,489 |
| 2,000 sq ft | $260,255 | $352,000 | $479,319 |
| 2,500 sq ft | $325,319 | $440,000 | $599,149 |
| 3,000 sq ft | $390,383 | $528,000 | $718,979 |
| 4,000 sq ft | $520,511 | $704,000 | $958,638 |
| 5,000 sq ft | $650,638 | $880,000 | $1,198,298 |
Other North Dakota counties
Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in North Dakota averages 17.3% of finished property value (FHFA), which adds roughly 21% on top of these construction figures.
County multiplier of 1.02× applied to the North Dakota state average (which itself is 0.92× the national average of $188/sq ft).
Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County-level multipliers are estimates derived from regional market data. County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.