H
HouseBuildCalc
Home / North Dakota / Morton County

Cost to Build a House in Morton County, North Dakota

Building a house in Morton County, North Dakota costs about $173/sq ft in 2026 — roughly $304,480–$387,520 for a 2,000 sq ft mid-range home (construction only, land excluded). 100 single-family homes were permitted here in 2025, and the typical existing home is worth $327,161.

That is the North Dakota statewide rate: no public source measures construction cost county by county, so we don't invent a local premium. What does differ by county is measured below.

Mid-range $/sq ft
$173
North Dakota statewide rate
Homes permitted, 2025
100
5th of 53 in North Dakota
2,000 sq ft home
$304,480–$387,520
Mid-range estimate range

How much building happens in Morton County

Single-family homes permitted each year, 2000–2025. 2025 is highlighted; the 2008–2011 crash years are darker.

2000: 852001: 812002: 1062003: 1362004: 1292005: 1392006: 1702007: 2172008: 1252009: 752010: 892011: 1132012: 3592013: 2822014: 1812015: 1632016: 1742017: 1382018: 1052019: 942020: 992021: 1012022: 732023: 672024: 682025: 10020002025
2025
100
homes permitted
2000–07 peak
217
in 2007
Today vs. peak
46%
of pre-crash volume
vs. 2019
+6%
pre-pandemic baseline

Morton County is building 54% fewer homes than it did before the crash, up from a low of 67 in 2023. A thinner builder market can mean fewer bids and longer waits for specialist trades.

U.S. Census Bureau Building Permits Survey, county annual files 2000–2025 (1-unit structures, total including imputation).

Build or buy in Morton County?

Build, land included
$411,895
1,969 sq ft mid-range + lot
Typical existing home
$327,161
Zillow, 2026-08 (+6% yr/yr)
Building costs
+25.9%
vs. buying existing

Building a median-size new home in Morton County costs about $84,734 more than buying the typical existing one. That gap is narrower than the North Dakota average of +37.8%, because existing homes here are pricier than in much of the state.

The two sides are not the same product: the build is brand new at the median new-home size for the Midwest, the existing home is typically older and smaller. Lot cost uses North Dakota's average land share, and local lot prices can be well above or below it. Full North Dakota build-vs-buy comparison

Existing home value: Zillow Home Value Index, single-family, middle tier (2026-08) — an index of typical value, not a median sale price. Land: FHFA Working Paper 19-01.

What builders declared on Morton County permits (2025)

Single-Family Permits Issued
100
1-unit structures, 2025
Avg. Declared Valuation
$366,605
Per single-family unit

The average declared valuation was $366,605 per home, against our $346,000 estimate for a 2,000 sq ft mid-range build. The two measure different things: builders declare a valuation for permit-fee purposes, which routinely understates finished cost, and permits cover homes of every size and finish level. We show both because quoting only the flattering one would be dishonest.

Source: U.S. Census Bureau Building Permits Survey, 2025 annual data.

What building in Morton County actually involves

Cost per square foot is one number. These are the conditions behind it.

How busy this market is

Morton County ranks 5th of 53 counties in North Dakota for single-family permits issued in 2025, accounting for 5.7% of all the single-family homes permitted statewide that year.

That puts it among the busiest building markets in the state — deep contractor supply, but also the most competition for their time.

U.S. Census Bureau Building Permits Survey, co2025a.txt (2025).

What land adds on top

Land averages 17.3% of finished property value in North Dakota, which is a markup of about 21% on construction cost. For the $346,000 build above, that implies roughly $72,660 for the lot.

This is a statewide figure. Lots inside Morton County's built-up areas will run above it and rural parcels below, so treat it as an order of magnitude rather than a budget line.

FHFA Working Paper 19-01 land values.

Statewide factors

Trade wages, climate load, energy code and permit seasonality are set at state level, so they are the same for every North Dakota county. See them on the North Dakota page.

Cost by Home Size in Morton County

Home SizeBasicMid-RangePremium
500 sq ft$63,955$86,500$117,787
1,000 sq ft$127,910$173,000$235,574
1,500 sq ft$191,864$259,500$353,362
2,000 sq ft$255,819$346,000$471,149
2,500 sq ft$319,774$432,500$588,936
3,000 sq ft$383,729$519,000$706,723
4,000 sq ft$511,638$692,000$942,298
5,000 sq ft$639,548$865,000$1,177,872

Other North Dakota counties

Costs are estimates only and represent construction costs, excluding land, architect fees, permits, and landscaping. Land in North Dakota averages 17.3% of finished property value (FHFA), which adds roughly 21% on top of these construction figures.

Priced at the North Dakota state average, which is 0.92× the national average of $188/sq ft. Permit and home-value figures are specific to Morton County.

← View all of North Dakota

Cost data: HouseBuildCalc Permit Cost Index (876,000+ building permits, 1,700+ ZIP codes), U.S. Census Bureau Survey of Construction, BLS Producer Price Index, NAHB Cost of Constructing a Home (published summaries). County permits: U.S. Census Bureau Building Permits Survey. Home values: Zillow Home Value Index. For planning purposes only.